# Applist and Security rule Environemnt not showing

**URL:** https://community.easyqlik.com/t/applist-and-security-rule-environemnt-not-showing/465
**Category:** QSDA
**Created:** [June 7, 2024, 12:50pm UTC](https://community.easyqlik.com/t/applist-and-security-rule-environemnt-not-showing/465 "2024-06-07T12:50:51Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![naresh.maddiralla](https://community.easyqlik.com/letter_avatar_proxy/v4/letter/n/48db29/32.png) [@naresh.maddiralla](https://community.easyqlik.com/u/naresh.maddiralla)
#### Post date: [June 7, 2024, 12:50pm UTC](https://community.easyqlik.com/t/applist-and-security-rule-environemnt-not-showing/465/1 "2024-06-07T12:50:51Z")

</div>

While setting up the connector , i could not see the Applist and Security rule Environemnt not showing

---

<div class="post-metadata">

### Author: ![rob](https://community.easyqlik.com/user_avatar/community.easyqlik.com/rob/32/8_2.png) [@rob](https://community.easyqlik.com/u/rob)
#### Post date: [June 8, 2024, 1:27am UTC](https://community.easyqlik.com/t/applist-and-security-rule-environemnt-not-showing/465/2 "2024-06-08T01:27:32Z")

</div>

Hello,

Those options are available when you press the “Show Advanced” button on the Connections def screen.

-Rob